Enhancing Fluid Recovery in Shales: Why Pores less than 10nm Matter

Enhancing Fluid Recovery in Shales: Why Pores less than 10nm Matter

SPE Distinguised Lecturer
←  SPE - Calgary Section


Distinguished Lecturer:
Enhancing Fluid Recovery in Shales: Why Pores less than 10nm Matter?

Date: Tuesday 21st of January 2020
Speaker: Gregory Walker, Discipline Manager for Reservoir Engineering at Repsol
Location: Calgary Petroleum Club
Time: 11:30 AM - 1:00 PM 
Cost:
Members: $ 45, Non-Members: $55, Students: $15 


Abstract:

The one idea to take away is "If you're trying to calibrate shales, you'll need to calibrate the pores less than 10nm".

Unconventional reservoirs are present worldwide, and have added 7500Tscf and 418Billion stb of liquids to global resources by EIA estimates. The new prize is predicting the liquid yield and improving liquid recovery, with cyclic gas injection offering a route to a +60% increase in liquids.

However, these are unconventional reservoirs, so some basic assumptions and mechanisms change. For a conventional reservoir we expect lighter fluid above denser fluid, for fluid samples to represent the fluid in the pores, and for lab measurements to apply in the reservoir.

For an unconventional reservoir, the pore throat size becomes important. Small pore throats have low permeability, so the fluid type depends on local source maturity, with oil over gas, and lateral variations in a long horizontal well. The small pores impact the phase envelope, such that lab measurements of the phase envelope may not apply. The small pores also have a large surface area for adsorbed gas, so a fluid sample might not represent the actual composition. The Langmuir pressure for shales can be above 4000psi, taking the release of adsorbed gas into similar pressures as dewpoint for a condensate. The realisation that the adsorbed gas could be releasing methane into the free gas, changing the liquid yield above the dewpoint of the free gas, has allowed a history match of the unusual liquid yield behaviour.

Speaker Bio:

Greg Walker is the Discipline Manager for Reservoir Engineering for Repsol.

His thesis is from the University of Cambridge, working on fluid flow in fractured reservoirs. His 18 years in the industry started with performing reservoir studies for supergiant fractured carbonates fields in the middle east, and have included fractured basement and carbonate fields in Asia, and onshore shales. He has supervised a PhD candidate at the University of Calgary, authored papers on topics including time lapse seismic (SPE 106019), production optimization (IPTC 11650), Ensemble Kalman Filters for SAGD reservoirs (SPE188387), and unconventionals (SPE185045).

He has been an editor for JCPT, and a session chair at the Bruges ATW on Closed Loop Reservoir Management.


Don't miss out and sign up today!



Is your Membership up-to-date? Are you looking to become an SPE Member? Learn more here!

​​


January 21, 2020
From 11:30 AM to 1:00 PM
Calgary Petroleum Club
Login