!DOCTYPE html> SPE - Calgary Section
Webinar Download: An Examination of the Effects of Surface Data Acquisition Methods on Well Performance Evaluations & Completion Optimization

Webinar Download: An Examination of the Effects of Surface Data Acquisition Methods on Well Performance Evaluations & Completion Optimization

REPO
←  SPE - Calgary Section

Reservoir Evaluation & Production Optimization Presents:
An Examination of the Effects of Surface Data Acquisition Methods on Well Performance Evaluations & Completion Optimization

Date: Wednesday, January 26th, 2021
Speaker: Darryl Tompkins

SPE Members: Free, Non Members: $10
>

Recorded Webinar Access Instructions:
Once you purchase the member or non member rate you will receive a confirmation email, inside this email is a link to the pre-recorded session. If you do not receive this email within an hour of your purchase, please email calgarysection@spe.org.


Abstract:

It is a common practice in the development of unconventional wells to change completions designs in an effort to determine which design works best in each area. Quite often a Rate Transient Analysis (“RTA”) of the flowback / early production data is used to evaluate how well performance is affected by changes in the completion design. Many analysts faced with performing RTA struggle to have confidence in the analysis results due to poor quality production data. This presentation shows how different surface data acquisition methods effect the evaluation of well performance using common RTA techniques. Additionally, this presentation will recommend preferred methods of data acquisition and demonstrate how these methods produce less ambiguous results.

Examples of early production data are shown that were acquired from a variety of common sources found in production operations. Practical measurement QA/QC methods are used to evaluate data quality, and RTA is used to demonstrate the effect data quality has on the well performance evaluations. Comparisons of results will be used to illustrate the impact that good and poor quality data can have on evaluating the relative difference in well performance due to changes in completion designs.

Superior data quality should be a top priority if a well's performance and/or completion design needs to be evaluated quickly and accurately with RTA of the early production period. Some data acquisition methods shown in this presentation are not adequate for collecting the quality of data needed to produce reliable analysis results. Frequently, the changes from one completion design to the next are relatively small. With poor quality data, it can be impossible to quantify the effect of these changes. Examples presented in this presentation show how poor data quality can be misleading when it comes to well performance evaluations. Examples of data acquisition from some of the best quality sources illustrate how straight-lines used on specialized diagnostic plots can match the data very closely. This gives the analyst much more confidence in the magnitude of the difference in well performance due to changes in the completion design.

Iterative completion optimization can be a waste of time and money if the difference in a well's performance due to changes in the completion design cannot be evaluated quickly and accurately. If those responsible for unconventional well performance optimization are going to continue to rely on the insights provided by RTA, it seems only logical that the data going into the analysis needs to be of the highest quality possible.

Reservoir and production engineers need high quality data to evaluate a well’s performance so that they can provide feedback to the completions engineers on which changes in the completion design have the largest impact on well performance. None of this can be done properly if the production team does not receive the best quality data available. It is essential that the production team has the right people and equipment in place to consistently collect high quality data. This often seems to be an overlooked component of the overall value chain.


Speaker Bio:

Darryl Tompkins has spent his career working in reservoir, completions, and operations engineering in mature fields, gas storage, and unconventionals. He is currently the Chief Technology Officer of Revo Testing Technologies based in Houston TX where he works on developing technologies for unconventional well performance evaluations and production optimization. He is a registered Professional Engineer in the Province of Ontario and he holds a B.Sc. in Mechanical Engineering from the University of Windsor, Canada.


Don't miss out and sign up today!


Is your Membership up-to-date? Are you looking to become an SPE Member? Learn more here!

​​​​​



Login